Forte VFX1, Руководство пользователя

Страница: 61 / 80

VFX1 HEADGEAR User's Manual
Symptom 5: The CyberPuck fails to function correctly during the TEST
CYBERPUCK "Tracking & Button Test "
Check: Is the CyberPuck ACCESS.bus plug securely fastened to the
ACCESS.bus jack located at the back of the helmet or the port
located on the VIP Card? Confirm that the cable plug is firmly
seated and securely fastened to the helmet jack.
Are there other ACCESS.bus devices on your system? The
initial release of the VIP Card software provides ACCESS.bus
support for the CyberPuck only. If another ACCESS.bus
devices exist on your system, there may be a conflict. Check
your system manual and, if another ACCESS.bus device exist,
you may have to disable the conflicting device.
Symptom 6: There's no sound at the headset earphones and/or the
headset microphone is not working.
Check: Does the application provide sound support? The VFX1
HEADGEAR system does not provide sound support beyond
that of the application being run. Check your software User's
Manual to confirm that the application provides sound support.
Are the VIP and sound cards connected correctly? Confirm that
the phono cables are correctly installed and securely attached:
• Amplified LINE OUT output of Sound Card connected to
the HEADPHONE IN input on the VIP Card,
• MICROPHONE OUT output of VIP Card connected to the
MICROPHONE IN input of the Sound Card.
Is the sound level set correctly? Make sure that the volume
control for the Sound Card is set to an acceptable level.
Is the Sound Card Working? Try attaching an alternate headset,
speakers, and/or microphone to the sound card and test to make
sure that the sound card is working. Confirm that the volume is
set at an adequate level (Also see symptom 7 below).
5-4