Forno FRHWM5002-30, Инструкция по эксплуатации

Страница: 11 / 14

9
Chimney installation
*There are 2 chimney brackets, one is slightly shorter for the lower chimney. The longer bracket
is for upper chimney.
Drill 2 holes to tighten the shorter bracket on the wall by screws. Hang the lower chimney on the
bracket. (Fig.8)
Drill 2 holes to tighten the longer bracket on the wall by screws for the upper chimney.
Put the upper chimney into lower chimney. Then slide it up to reach the height required.
Tighten the longer bracket with screws. (Fig.9)
If you do not have an outlet to the outside (vent inside), exhaust pipe is not required. Tightened
the lower chimney to the hood with 2 screws. The chimney installation for vent inside is done.
If you have an outlet to the outside (vent outside), your cooker hood can be connected by means
of an extraction duct (with an interior diameter of 6” or 150mm)