Forno FRHWM5002-30, Инструкция по эксплуатации

Страница: 6 / 14

4
LED LIGHTS
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY AT THE MAIN PANEL BEFORE
CARRYING OUT ANY OPERATION ON THE APPLIANCE.
To change the bulbs
1. Open the filter and find the spring of the light, push the spring
and the lights will be slip out.
CAUTION: BULB MAY BE HOT. PLEASE TAKE OUT THE
BULB WHEN IT IS COMPLETELY COOL!
2. Replace with a 12Volt, 1.5Watt max, LED lights. Do not touch replacement bulb with
bare hands!
CONTROLS
BUTTON FUNCTIONS
Default delay timer is 5 min.s, press 2 sec until the display blinking,
then adjust 1-9 delay timer.
Decrease the speed until off.
Start the motor with 1-2-3 speed.
Turn the Lighting System on and off.