9
Put the griddle (for 48” model only) on any burner you
want to use.
Oven Rack Installation
Put the baking rack onto the side rail.
Raise the backing rack a little bit so that the steel ball
underneath can cross the side rail.
Push the baking rack slowly all the way into the oven cavity.
Electrical
Your range must be electrically grounded in accordance with local codes or, in the absence of local codes, in
accordance with the National Electrical Code (ANSI/NFPA 70, latest edition). In Canada, electrical grounding must
be in accordance with the current CSA C22.1 Canadian Electrical Code Part 1 and/or local codes.
The power supply must be the correct polarity. Reverse polarity will result in continuous sparking of the electrodes,
even after flame ignition. If there is any doubt as to whether the power supply has the correct polarity or grounded,
have it checked by a qualified electrician.
ELECTRICAL REQUIREMENTS
Electrical Supply
Grounded, 110/120 VAC, 60 Hz
Service
15 amp or 20 amp dedicated circuit
Receptacle
3-prong grounding-type
Power Cord
5.5' (1.4 m)
WARNING
Electrical grounding Instructions:
This range is equipped with a three-prong (grounding) plug for your protection
against shock hazard and should be plugged directly into a properly grounded
three-prong receptacle. DO NOT cut or remove the grounding pin from the plug
.
