Forno Venetzia TORINO 300, Инструкция по сборке

Страница: 6 / 32

4
4. Carefully remove the laser film protective covering. Avoid using sharp or metal objects so as
to not damage the finish of the oven.
5. Position the polystyrene packaging on the floor and place the parts on it to avoid scratches.
**CAUTION – AS THE OVEN IS HEAVY SOME STEPS REQUIRE TWO PEOPLE TO PERFORM THE
ASSEMBLY**
1 – Chimney Cap
1 – Chimney Pipe
1 – Adjustable Oven Tool Holder
1 – Oven Body
1 – Oven Door
1 – Sliding Shelf
1 – Sliding Shelf Housing
1 – Middle Shelf
2 – Leg Panels
1 – Lower Shelf
2 – Wheel Brackets
2 – Swivel Wheels
2 – Fixed Wheels
5
Cross
Recessed
Round
head
screws
M4 x 10 Stainless
Steel
10 Sliding Shelf
6 Wheel
Blocks
n/a Rubber 2
Place firmly up
against wheels to
prevent movement
during operation
7
Philips
Screw
Driver
Ø6,
L=100mm
N/A 1 Tool
4. Carefully remove the laser film protective covering. Avoid using sharp or metal objects so as
to not damage the finish of the oven.
5. Position the polystyrene packaging on the floor and place the parts on it to avoid scratches.
**CAUTION – AS THE OVEN IS HEAVY SOME STEPS REQUIRE TWO PEOPLE TO PERFORM THE
ASSEMBLY**
1 – Chimney Cap
1 – Chimney Pipe
1 – Adjustable Oven Tool Holder
1 – Oven Body
1 – Oven Door
1 – Sliding Shelf
1 – Sliding Shelf Housing
1 – Middle Shelf
2 – Leg Panels
1 – Lower Shelf
2 – Wheel Brackets
2 – Swivel Wheels
2 – Fixed Wheels
8. Lay the partially assembled cart on its side so that the wheel brackets are horizontal.
9. Position the lower shelf so that the
cutouts on the lower shelf are aligned with
the wheel brackets.
10. Attach the lower shelf to the leg panels
with the hexagon socket screws provided.