formlabs Form Wash, Быстрый старт

Страница: 6 / 12

6
1. Insert Print
Use the display and knob to raise the platform and basket mounts. For
convenience, install the build platform directly in Form Wash to clean
parts before removal. Align the top lip of the build platform with the
arms of Form Wash’s platform mount, and fully insert to touch the back.
TIP For a complete wash, ensure that IPA is filled between the minimum
and maximum fill lines.
ALTERNATIVE WASH METHOD Parts can also be washed in the
basket, either as an alternative or in addition to the platform mount.
Place parts directly in the basket after removing them from the build
platform using the removal tool, scraper, or flush cutters. The basket
comes installed in Form Wash. Without a build platform installed, the
basket can be removed by lifting vertically from the basket mount.
NOTE Parts must be washed on the build platform and/or in the basket.
Washing loose parts directly in the wash bucket will damage printed
parts, create noise, and may interfere with the agitation of IPA.
USING FORM WASH
CAUTION: Wear gloves when handling parts
and surfaces with IPA or uncured resin.