formlabs Form Wash, Быстрый старт

Страница: 4 / 12

4
1. Fill Wash Bucket with IPA
Isopropyl alcohol (IPA) is a solvent used to remove uncured resin
from SLA 3D prints. Open the outer lid. Pour or siphon to fill the wash
bucket with IPA to reach a level between the minimum (7.8 L) and
maximum (8.6 L) fill lines. For more information about using a siphon,
see Changing the IPA on page 9.
NOTE For more information on buying, handling, safe storage, and
disposal of IPA see: formlabs.com/ipa
2. Connect Power Supply
Connect the power cable to Form Wash and a power source.
FORM WASH SET-UP
USB port provided for future updates.