![background image](http://html1.mh-extra.com/html/formax/autoseal-fd-2056/autoseal-fd-2056_operators-manual_2320036024.webp)
20
TROUBLE-SHOOTING
TROUBLE
POSSIBLE CAUSE
REMEDY
Control panel is not
illuminated.
Power switch turned off.
No power at the wall outlet.
No power to the machine inlet.
No power to the control panel.
Internal electrical failure
Turn on power switch.
Check wall outlet.
Check power cord for frayed/broken wires.
Press the button on the circuit breaker.
Call for service.
Fold table stop not moving
when “Test”/ “Start” is
pressed.
Fold table is not plugged in.
Electrical or mechanical failure
Plug in fold table.
Call for service.
“Cover Open” image is
displayed.
Cover open
Magnetic switch is broken.
Close cover.
Call for service.
“Paper out” image is
displayed.
Infeed tray is empty.
Place documents on the infeed tray.
“Paper Jam / Misfeed”
image is displayed.
Paper misfeed
Paper jammed at exit of folder
Reload paper and press “Counter Reset”
button.
Remove paper and press “Counter Reset”
button.
Black marks on the folded
paper.
Infeed tires, separator, and/or
fold rollers are dirty.
Clean the parts with approved roller cleaner
and rejuvenator.
Fold is skewed.
Infeed tray is out of adjustment. Turn skew adjuster knob to remove the skew.
Stacker belts do not turn.
Broken drive belt, worn drive
gear.
Call for service.
Documents are wrinkled or
crunched.
Fold tables are not inserted
correctly.
Piece of paper or other material
is stuck in the fold table.
Remove and reinstall fold tables. Be sure
they’re properly positioned.
Remove object from the fold table.
Infeed tray lever does not
work
Broken spring
Call for service.
Double feeding forms
Documents stuck together
More tension is needed
Feed tire or separator worn
Jog forms to remove static electricity.
Adjust the infeed tension lever (page 5, Fig. 8)
Call for service
Not feeding documents
Feed tires are dirty
Feed tires or separator worn
Clean feed tires
Call for Service
Power loss
Circuit Breaker tripped
Under adverse conditions,
power input level may drop
below acceptable limits
Press black reset button next to power inlet.
When power is restored, turn off machine, then
turn on again to restore normal operations.
Содержание AutoSeal FD 2056
Страница 1: ...FD 2056 AutoSeal FE 2056 AutoSeal Pressure Sealer OPERATOR MANUAL FIRST EDITION 9 2020...
Страница 2: ......
Страница 4: ......