6
Fig. 11
Skew Adjuster
9.
Select the type of fold desired by pressing the fold
selection icon (Fig. 9). Note:
If the fold selection
icon shows the desired fold press the “Start/Stop” icon
to begin processing forms.
10. Select the standard fold type (Fig. 10) needed and
press the “Enter” icon to set the fold stop
positions.
When the fold stops are set, the control panel will return
to the home screen. The selected fold icon should now
be displayed.
Press the “Start/Stop” icon to begin processing
forms.
Press the test icon to check the fold.
11. If the fold is skewed, remove forms, lower the infeed
tray extension and turn the skew adjustment knob left
or right to make corrections (Fig. 11).
12.
When satisfied with the test fold, press the
“Start/Stop”
icon to begin processing forms. Press the same
icon to stop.
13. Press the “-” or “+” icons to adjust machine speed to
desired level.
Fig. 9
Fold selection icon
Fig. 10
Standard folds selection icons
Custom fold setup icon
Enter icon
1.
2.
3.
1.
2.
3.
Invoice
Flyer
Brochure
“Start/Stop” icon
Test Button
Содержание AutoSeal FD 2056
Страница 1: ...FD 2056 AutoSeal FE 2056 AutoSeal Pressure Sealer OPERATOR MANUAL FIRST EDITION 9 2020...
Страница 2: ......
Страница 4: ......