Formax Atlas C350, Руководство оператора

Страница: 51 / 95

51
2
Loading Paper
1. Take a stack of printed paper and place it on the feeder table in the desired orientation.
NOTE:
If using sheets longer than 450 mm (17.7”), but shorter than 700 mm (27.6”) extend
the built-in pull-out table. If using sheets longer than 700 mm (27.6”) see the optional
“Feeder Table Extension” section within this manual.
NOTE:
To make sure the magnetic paper guides are not too tight put a single sheet of paper
between the stack and the guide when setting the guide.
2. Ensure the paper is pushed into the corner and is aligned to both the registration wall
[A] and the front wall [B].
3. Align the magnetic paper guides [C] with the edges of the paper stack. Ensure the
guides are not too tight and the sheets can move freely.
A
B
C
C