manualshive.com logo in svg

Formax 6204 Series, Руководство по обслуживанию

Поделиться
Скачать
Formax 6204 Series Скачать руководство пользователя страница 34

BRE offset

If a document is longer than the set address fold but shorter than the envelope height, this document sometimes
will be unnecessarily folded. Under certain conditions this document can be prevented from being folded. This can
be implemented with the menu “BRE offset” (BRE means Business Reply Envelope).

For each of the jobs 1 through 15 and Automatic, an offset can be switched on or off using the arrow button.

In the case of offset on the last document that had been added to the set prior to further processing will be shifted
from the rest of the set (offsetting), i.e. this document will be held back during a certain distance. This means that
the trailing edge of this upper document leaves the collator last. This document will not be folded. During insertion
into the envelope the documents of the set will be realigned.

The conditions are:

• The feeder that supplies this upper document (BRE) is set to one document per set (no multi feeding).
• The document directly beneath this document must be at least 60 mm (2.4 inch) longer than the BRE.
• The upper document must be longer than the set address fold.
• The folding mode is either single fold or letter fold (no Z-fold).
• The upper document must be shorter than the envelope height.

It is possible to use the BRE offset for a BRE and an enclosure (card) in one set. The extra
condition is that this enclosure is equal to or smaller than the set address fold and should
be placed direct underneath the BRE in the set.

The whole BRE offset is based on friction between documents within a set. Therefore it is necessary to make use
of these conditions to reduce the risk of bad transporting, folding and inserting.

In some cases the BRE option is automatically switched off if one or more of the abovementioned conditions are
not met. Therefore it is safe to switch the BRE option on, unless this option will never be used.

Secure jobs

With the Secure job menu the selected job can be secured, i.e. locked. This job can not be deleted and can not be
changed in the job menu either. However, a locked job still can be copied into another job that can be modified.

4

063.1

Service

Guide

31

Содержание 6204 Series






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды