manualshive.com logo in svg

Formax 6204 Series, Руководство по обслуживанию

Поделиться
Скачать
Formax 6204 Series Скачать руководство пользователя страница 33

Reset data

There may be situations in which it is necessary to restore the system settings to their states at the beginning of
the system’s operational life. To this purpose the menu item Reset Data is present.

Make sure all paper is removed from the machine, before you start Reset data. This is necessary because the data
resetting includes readjusting of the photocells.

• Press [Reset counters] to reset all counters (daily counter, counter since last service visit and counters for

the envelope hopper and feeders).

• Press [Reset data] to start the reset process. This results in clearing all the data in the FRAM memory of the

system.

• If you want to restore the default data in mm and ISO values, press [Load defaults mm].
• If you want to restore the default data in inches, press [Load defaults inch].

The changes made by this reset data operation are irreversible! All changes made on the
previous factory settings will be lost.

The value of the counter Since installation, the Last error list and the Error counter are not
deleted when you restore the system.

Folder ratio

The folder ration determines the speed at which the document set enters the folding table. The folder ratio is the
ratio between pulses and mm. The ratio can be adjusted between 0.940 and 0.950. The optimum value is 0.945.

Job settings

Flap closer

The flap closer offset is set in the System Settings menu, Flap closer offset. In the Flap closer menu in the Job
Settings menu you can adjust the timing of the activation of the sealing solenoid (So3) on a per-job basis. You can
use this function to improve the sealing process per job. The timing has influence on the position of the filled envelope
with its flap fixed between rollers 21 and 22 prior, before it is transported between the sealing rollers. This position
can be adjusted between -10 and + 10 mm (with respect to the default envelope position).

Document offset

The vertical transport of documents fed by the various feeders is arranged in such a way that the documents are
partially overlapping each other. This overlapping scheme ensures that the documents are properly aligned in the
collator area.

In the “document offset” menu you can set the extend to which the documents are not overlapping each other, i.e.
the document offset value. The default value is 50 mm (2.0 inch). The document offset can be varied between 20
mm (0.8 inch) and 75 mm (3.0 inch).

30

4

063.1

Service

Guide

Содержание 6204 Series






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды