HD 13S14 Rev0.Dec22, 2017 Page
3
of
11
5.
Remove the hood protector installation
tape measure by loosening the screw and
removing the pin. Place the hood
protector on the pedestals to confirm
proper positioning. Ensure the holes in
the protector align with those in the
pedestals. If necessary, reposition the
pedestals so all attachment positions are
correct and the protector is well centered.
6.
Remove the hood protector, and outline
the perimeter of the pedestals with
masking tape or the re-usable tape strips
supplied to help final installation.
7.
Remove the pedestals and thoroughly
clean the outlined area with the alcohol
wiping pad. Wipe dry with a clean cloth or
paper towel. This will insure all wax,
finger prints and oils are removed from
the hood surface in the bonding area.
Important! Proper preparation of the
hood surface will ensure maximum
adhesive bond.
