FOREVER Rocker RC-100, Руководство пользователя

Страница: 5 / 32

5
EN
12. Remote activation LED
13. Remote switch
14. Throttle – driving forward and backwards
15. Handle
16. Battery cover mounting screw
17. Remote battery cover
Batteries in the remote
– Use only 4 x 1.5 V AA batteries.
– The battery must be installed according to markings in the socket.
– Do not short-circuit poles of the batteries.
– Remove the batteries from the remote when it is not used.
– Insufficient power supply may cause difficulties in controlling the device.
– Do not throw the batteries into fire. Protect the batteries against overheating.
– Protect the batteries against mechanical damage.
– Hand over used batteries to batteries collection points. Do not dispose of batteries and elec-
tronics with municipal solid waste.
Installation of batteries in the control remote
1. Remove the battery cover.
2. Install 4 x 1.5 V AA alkaline batteries according to markings in the socket.
3. Close the battery socket cover and install the screw.
NOTE: Do not use batteries other than those specified in the specification.
Batteries in the car
– Use only the battery attached to the set.
– 7.4 V Li-poly batteries may ignite spontaneously if they are not used according to recommen-
dations.
– Remove the batteries from the car when it is not used.
– Rechargeable batteries should be removed from the car before they are charged.
– The drive time will be reduced when the car and the remote are not charged sufficiently.
Insufficient power supply may cause difficulties associated with acceleration and off-road driving.
– Do not leave 7.4 V Li-poly batteries unattended when they are charged.
– In case of problems associated with a battery (overheating, swelling, mechanical damage), im-
mediately disconnect it from a charger.
– Do not short-circuit the poles of the batteries.
– Do not throw the batteries into fire. Protect the batteries against overheating.
– Protect the batteries against mechanical damage.
– Hand over used batteries to batteries collection points. Do not dispose of batteries and elec-
tronics with municipal solid waste.
Installation of a battery in the car
1. Remove the screw securing the battery cover.
2. Tilt the two hooks of the battery socket.
3. Insert the battery and connect it to the car using the quick-coupler.
4. Close the battery socket cover.
5. Protect the cover by screwing the securing screw in.