Foretravel GV320, Руководство пользователя

Страница: 28 / 118

Section 4 - Familiarization of Your New Motorhome
Page 4-6 Foretravel Owners Manual
Rev. 06-02
CAUTION
Never add coolant to the radiator when the engine is overheated. Do
not loosen or remove cap to cool overheated engine.
Check Engine Light (Yellow)
Stop and check engine as soon as possible.
Stop Engine Light (Red)
Stop engine immediately and have serviced. Engine will shut down in 30
seconds.
Left Turn Indicator (Green)
The turn signal indicator will flash in unison with the exterior turn signal.
Driving Light Indicator (Green)
Illuminates green when driving lights are on.
Level System Light (Yellow)
Illuminates yellow when the ignition key is ON and the air level system is
not at travel height.
High Beam Indicator (Blue)
Illuminates blue when high beam lights are on.
Lower Antenna Light (Red)
Illuminates red when TV antenna is up and ignition key is on.
Right Turn Indicator (Green)
The turn signal indicator will flash in unison with the exterior turn signal.
ABS System Light (Yellow)
Illuminates at startup for 2-3 seconds. If the yellow light stays on or comes
on while driving, the ABS system may be non-functional. Drive With Cau-
tion! See page 12-3.
DRIVER INFORMATION CENTER
The ignition switch must be in the ON position for the display to be acti-
vated. The two lines of the display operate independently and are controlled
by the scroll keys on each side of the display line. The left keys scroll across
the menu tree and the right keys scroll down the tree. Each key has two func-
tions depending on whether it was pressed and released or pressed and held
for more than two seconds. Generally, to scroll a line, a key is pressed and
released, to run a setup or function, a key is pressed and held.
If the internal real-time clock activates the alarm the DataStar sounds the
beeper and flashes the current time and alarm time on the screen. The beeper
will sound for up to 30 seconds then stops automatically, the display will con-
tinue to flash until the user presses a key. At any time, the user can cancel the
beeper and the flashing display by pressing a key. Once the alarm is canceled
the display returns to what was previously displayed. If the ignition if off, the
DataStar responds to the real-time clock alarm in the same manner, except that
it will go back into the low power mode after the user cancels the alarm.
See Driver Information Center Manual for detailed information.