Forest Xtend 4.0 Скачать руководство пользователя страница 34

Страница: 34 / 41

BEADED WALL PANELS & ROOF BATTENS

Move onto the front beaded boards. There will be

two ‘L’ shaped pieces on either side of the door.

Use 10 x 50mm screws to secure. Use 6 x 50mm

screws on the top half and 4 x 50mm screws on

the bottom half. Use 6 x 50mm screws for the lintel

board in the middle.

215

On the side panels, work from the front to the

back. Ensure the window board is flush to the

window edges. Then apply the next side piece.

This is already trimmed for the provided space.

216

As the roof has smaller MDF roof panels at the

front, measure out and ensure that both roof MDF

panels will fit half way onto that batten from front

to back. If unsure, use the below steps as a guide.

220

222

Apply the 45x45mm roof battens. Start at the

front. Ensure it is flush end to end and against

the front beaded panels. Secure with 5 x 80mm

screws. Repeat the same process at the back.

219

Use 10 x 50mm screws for the window panel and

the trimmed side panel. Repeat the same process

on the opposite side. Both of these will be the

same sizes to fit into place.

217

Use 4 x 50mm screws on each side and 2 x 50mm

screws in the centre for both panels.

218

Measure and mark out equal spacing for the rest

of the central battens. Position and secure with 5 x

80mm screws per roof batten.

221

Mark out a guide line underneath all the battens

at both ends. This will help when applying the roof

panels and ensuring that you drill into the battens

behind.

Содержание Xtend 4.0










































Результаты поиска

Содержание Xtend 4.0

Отзывы:

Похожие инструкции для Xtend 4.0

Бренды по названию

Популярные бренды

Forest Xtend 4.0, Руководство пользователя

Результаты поиска

Содержание Xtend 4.0

Отзывы:

Похожие инструкции для Xtend 4.0

Бренды по названию

Популярные бренды