8
│
Installing the Forest Shuttle
®
S / M / L
Z-Wave
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
With the Z-Wave plus info get command you can request the Z-Wave plus information of the Shuttle LZ.
The information
contains
-
Role Type: Always On Slave
-
Node Type: Z-Wave Plus Node
-
Installer Icon: Window Covering Endpoint Aware
This will be shown on a GUI as the following icon:
-
Installer Icon: Window Covering Endpoint Aware
This will be shown on a GUI as the following icon:
0x20 COMMAND_CLASS_BASIC
The basic command class has a supporting role.
The supporting role of the basic command class is mapped to the switch multilevel command class.
Where
-
0xFF is fully open
-
0x00 is fully closed
-
0x01
–
0x63 is a curtain rail position.
COMMAND_CLASS_ASSOCIATION_V2
The Association Command Class is used to associate other devices with the Shuttle LZ.
The Shuttle LZ only has 1 supported association group. This group holds the lifeline to the controller according to Z-Wave Plus
standards.
Group 1: lifeline
Maximum supported nodes per group: 1
The node associated in this group will receive an unsolicited SWITCH_MULTILEVEL_REPORT frame every time the position of the
curtain rail is changed, where the value represents the (changed) position.
It is most likely that a controller or screen is associated in this group to (unsolicited) report any changes to the curtain rail
position.
Specific group report
Because there is only association group the reported group with this command is always group 1.
