7
│
Installing the Forest Shuttle
®
S / M / L
Z-Wave
Advanced Z-Wave configuration of the
FOREST SHUTTLE® S / M / L
Z-Wave
Z-Wave Plus: Yes
Z+ Plus Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
Z+ Device type: WINDOW_COVERING_POSITION_ENDPOINT_AWARE
Basic type: BASIC_TYPE_ROUTING_SLAVE
Generic type: GENERIC_TYPE_SWITCH_MULTILEVEL
Specific type: SPECIFIC_TYPE_CLASS_C_MOTOR_CONTROL
Listening: TRUE
Z-Wave Lib: 6.51.10
Supporting command classes
class: 0x5E COMMAND_CLASS_ZWAVEPLUS_INFO_V2
class: 0x85 COMMAND_CLASS_ASSOCIATION_V2
class: 0x59 COMMAND_CLASS_ASSOCIATION_GRP_INFO
class: 0x25 COMMAND_CLASS_SWITCH_BINARY
class: 0x26 COMMAND_CLASS_SWITCH_MULTILEVEL_V3
class: 0x86 COMMAND_CLASS_VERSION_V2
class: 0x72 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
class: 0x5A COMMAND_CLASS_DEVICE_RESET_LOCALLY
class: 0x27 COMMAND_CLASS_SWITCH_ALL
class: 0x73 COMMAND_CLASS_POWERLEVEL
class: 0x7A COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
Routing slave
This Z-Wave product will be used as slave. Slave nodes are nodes in a Z-Wave network that receive commands and perform
actions based on the command. A routing slave can route Z-Wave messages to other nodes in the network.
Always on slave
The Z-Wave
plus role type of this routing slave product is ‘slave always on’.
That means that this device is always awake and does not go to sleep mode because it is an AC powered device. It is always
available for communication with a controller.
This device can also act as a wireless repeater to forward commands for another device in the Z - Wave network to expand the
range of the network. This function works for every Z - Wave device from any manufacturer when included into the same Z -
Wave network. Unlike a normal slave a routing slave can store a number of static routes which he uses to send a routed RF
frame to another node.
Include initiator
The include initiator is used when Primary and Inclusion Controllers include nodes into the network. When both the include
initiator have been activated simultaneously the new node will be included to the network (
if the node was not included previously)
Exclude initiator
The exclude initiator is used by Primary Controllers to exclude nodes from the network. When the exclude initiator and a slave
initiator are activated simultaneously, it will result in the slave being excluded from the
network (and reset to Node ID zero). Even if the slave was not part of the network it will still be reset by this action.
Z-Wave compatibility
Because this is a Z-Wave device, it means it can co-operate with other Z-Wave devices of other manufacturers. It can co-exist in
a Z-Wave network existing with product from other manufacturers.
Hops & retries
The Z-Wave range has a range of up to 40 meters in line of sight. This signal is not limited to the 40 meters range due to routing
the Z-Wave message to other nodes in the network. This way the range of the Z-Wave network can be expanded to 160 meters
indoors (limit of 4 hops).
