forest river Forester, Руководство пользователя

Страница: 29 / 64

Retracting the Room-Equalizer System
1. The individual cartridge valves, for the jack legs and
slide room/s, are clustered together on the side of
the pump manifold. The valves for the slide rooms
are labeled 5 & 6.
2. Locate the red knurled knob on the directional valve
(DV2). This valve will be on the opposite side of the
manifold from the cluster of cartridge valves. Pull
the red knob out and turn 1/4 turn. The knob will
remain in the OUT position.
3. To retract, locate the red knurled knob on the direc-
tional valve (DV1). This valve will be on the adja-
cent side of the manifold to the cluster of cartridge
valves. Pull the red knob out and turn 1/4 turn.
4. Your pump may be equipped with additional direc-
tional valves for the slide rooms. If this is the case,
these additional valves will need to be shifted along
with directional valves DV1 and DV2.
5. Insert a handle into the hand pump, and operate
until the room is fully retracted. (It may take up to 50
strokes to build enough pressure output to begin to
retract the slide room.)
6. When retraction is complete, return the cartridge
valve/s and the directional valves DV1 and DV2 to
the normal position.
W ARNING
Following manual override operation, failure to
return all valves to normal position may result in
the room drifting from the retracted (closed) posi-
tion.
NOTE:
The normal operating position of the screw in the car-
tridge valve is the counter-clockwise out position. The
only time the valve should be shifted manually is when
attempting to operate the slide room via manual override.
NOTE:
When extending or retracting the slide room for best
results, do not allow anyone in the slide portion of the
room. During extended stays, move the slide room in and
out once or twice a week to help keep the seals and
internal moving parts lubricated. If you intend to store
your motorhome for an extended period of time, store it
with the slide room/s in the retract position.
NOTE:
For cartridge valves, rotate the center screw fully
counter-clockwise. For directional valves, rotate the red
knob until it snaps back to the normal position.
LEVELING JACKS AND SLIDE ROOM OPERATION
27