forest river Forester, Руководство пользователя

Страница: 46 / 64

DANGER
It is not safe to use cooking appliances for comfort
heating.
W ARNING
The propane oven and burners are operated using
propane. Cooking appliances need fresh air for
safe operation. Before operating this appliance:
•
Open an overhead vent or turn on an exhaust
fan, and
•
Open a window.
DANGER
Unlike homes, the amount of oxygen supplied is
limited due to the size of the recreational vehicle,
and proper ventilation when using the cooking
appliance(s) will avoid dangers of carbon monox-
ide poisoning or asphyxiation.
Lighting Surface Burners
The most common type of RV range is a three or four
burner built-in range with a glass oven door. It may light
manually or by using piezo ignition, which means there is
no pilot light for the range. Be sure the main propane
valve on the propane tank is in the ‘On’ position. For
more information, please consult the individual owner’s
manual or on-line at
www.forestriverinc.com .
DANGER
If the burner does not light within about 4 seconds
or if the flame should go out during cooking, turn
the burner off. If propane has accumulated and a
strong propane odor is detected, open a window
and wait 5 minutes for the propane odor to dissi-
pate before relighting the burner.
NOTE:
If the appliance has not been operated for a period of
time, the surface burners may be difficult to light due to
air in the propane line.
DANGER
Do not turn the control knob ‘ON’ and allow pro-
pane to escape before lighting the match.
To Bleed Air From Line
•
Turn the surface burner control knob to the LITE
position.
•
When the burner lights, turn the knob back to the
OFF position.
•
Depending upon your model, follow the procedure
for either ‘Match lit’ ignition or ‘Piezo’ ignition.
Match Lit Ignition
1. Place a pan on the burner grate.
2. Hold a lighted match next to the desired surface
burner head.
3. Push in and turn the surface burner control knob to
the LITE position.
4. When the burner lights, adjust the knob between HI
and LOW to select the desired flame size.
5. After cooking, turn the surface burner knob to the
OFF position.
Piezo Ignition
1. Place a pan on the burner grate.
2. Push in and turn the surface burner control knob to
the LITE position. (IMPORTANT: Only light one sur-
face burner at a time.)
3. Immediately, rotate the TOP BURNER IGNITOR
knob to the right (clockwise) several clicks until the
burner lights. The burner should light within 6 clicks
or one full rotation of the knob.
4. When the burner lights, adjust the surface burner
control knob between HI and LOW to select the
desired flame size.
5. After cooking, turn the surface burner control knob
to the OFF position.
If the piezo igniter is not functioning:
•
Be sure all controls are in the OFF position.
•
Hold a lighted match to the desired surface burner
head (DO NOT turn the control knob ON and allow
propane to escape before lighting the match).
•
Push in and turn the surface burner control knob to
the LITE position.
•
When the burner lights, adjust the knob between HI
and LOW to select the desired flame size.
•
After cooking, turn the knob to the OFF position.
W ARNING
When the recreational vehicle is not in use or while
traveling, turn all knobs to the off position and turn
off the main propane supply. When using the oven,
do not cover bottom or entire rack with aluminum
foil.
The oven features pilot ignition. Be sure all control knobs
are in the OFF position before supplying propane to the
appliance. Be sure propane supply to the appliance is on
before lighting pilot or oven burner. If the appliance has
not been operated for a period of time, the oven pilot
may be difficult to light due to air in the propane line.
APPLIANCES
44