DRY
WASH DRY
UV
STERILIZATION
FEMININE
POSTERIOR
SPRAY INTENSITY
NOZZLE POSITION
ON OFF
/
/
DRY
TEMP.
SEAT
TEMP.
WATER
TEMP.
LIGHTING
MASSAGE
+
H
L
page 10/14
STEP-BY-STEP ILLUSTRATED
OPERATING MANUAL/INSTALLATION STEPS
Massa Intelligent Bidet Seat
FOREMOST GROUPS INC. (U.S.A.): 6241 Northwind Parkway, Hobart, IN, USA 46342 - 1-888-620-3667 www.foremostbath.com
OCTOBER 2020
OPERATION & FUNCTIONS
Dry
• Press to start the posterior wash for 90
seconds, then dry for 4 minutes.
• If pressed again during 90 seconds, it will skip
to drying function.
• While washing, press the button to start the
cycle of cold and warm water.
• Only available when the “POSTERIOR” or
“FEMININE” wasvh function has started.
• Press again to stop the massage.
• Press to dry the front and rear areas.
• Switch the display of [LOW], [MED], [HIGH], [OFF].
• Stops automatically after 4 minutes.
• Shows the current temperature when pressed
once.
• Press again to change the temperature.
• Default temperature is MEDIUM.
• Switch the display to [LOW], [MED], [HIGH],
[OFF].
To restore to factory settings:
• If there is a confusion (higher water temperature, lower seat temperature, weaker spray strength) while using,
please unplug the seat for 1 minute, then reconnect it. The water temperature, seat temperature, drying temp.
and spray strength, nozzle position will restore to middle level settings.
STOP
WATER
TEMP.
SEAT
TEMP.
• Shows the current temperature when pressed
once.
• Press again to change the temperature.
• Default temperature is MEDIUM.
• Switch the display to [LOW], [MED], [HIGH],
[OFF].
• Shows the current temperature when pressed
once.
• Press again to change the temperature.
• Default temperature is MEDIUM.
• Switch the display to [LOW], [MED], [HIGH],
[OFF].
DRY
TEMP.
WASH/DRY
MASSAGE
DRY
LIGHTING
WATER TEMP.
SEAT TEMP.
DRY TEMP.
