Ford Villager страница 284 Скачать руководство пользователя

Страница: 284 / 400

Checking Engine Oil

Check the engine oil each time you fuel your vehicle.

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait a few minutes for the oil to drain

into the oil pan.

3. Set the parking brake and ensure the gearshift is securely

latched in Park,

4. Open the hood. Protect yourself from engine heat.

5. Locate and carefully remove the engine oil level indicator (dip

stick).

6. Wipe the indicator clean. Insert the indicator fully, then

remove it again.

If the oil level is between the L and H marks, the oil level is
acceptable. DO NOT ADD OIL

If the level is below the L mark, add enough oil to raise the
level within the L-H range

WARNING

Oil level above the H mark may cause engine damage.
Some oil must be removed from the engine by a service
technician.

7. Put the indicator back in and ensure it is fully seated.

280

Содержание Villager
















































































































































































































































































































































































































Результаты поиска

Содержание Villager

Отзывы:

Похожие инструкции для Villager

Бренды по названию

Популярные бренды

Ford Villager, Руководство пользователя

Результаты поиска

Содержание Villager

Отзывы:

Похожие инструкции для Villager

Бренды по названию

Популярные бренды