Ford Villager Скачать руководство пользователя страница 196

Страница: 196 / 400

Installing the Removable Captain Seats

To position the captain seats back in their original positions:

1. Make sure the area around the floor anchor positions is free

from obstruction.

2. With the seatback folded down, two people should lift the seat

into the vehicle.

3. Place the seat slightly behind the floor anchor positions and

catch the rear leg anchors into each anchor position.

4. Press down on the front of the seat to secure the front legs to

the two floor latch locks. Place the seatback in the upright
position.

5. Try to move the seat to be sure that it is securely fastened.

6. Replace any floor mats that were removed.

Labels have been provided on the side of the seats to remind you
of important safety precautions.

WARNING

Keep foreign objects out of the floor anchors. Objects in
the floor anchors could prevent front and rear seat legs from
engaging properly.

WARNING

Before sitting in the removable seats, make sure that the
seat legs are securely attached by the floor anchors.

192

Содержание Villager
















































































































































































































































































































































































































Результаты поиска

Содержание Villager

Отзывы:

Бренды по названию

Популярные бренды

Ford Villager, Руководство пользователя

Результаты поиска

Содержание Villager

Отзывы:

Бренды по названию

Популярные бренды