When you press and hold the
Voice
Pass-Through
button, the screen displays
the message
VR-APP ACTIV
, a tone
sounds and you can give a command with
a clear and natural voice.
Note:
Some devices may not accept this
pairing procedure. If these instructions do
not work for your device, follow the
instructions using the radio.
Using the radio
1.
Enable Bluetooth in your cell phone.
For information on phone settings, refer
to your phone user guide.
2. Press the
PHONE
button and then
keep pressing the
MENU
button to
scroll to the
ADD DEVICE
display.
Press the
OK
button.
3. Select the
VIA RADIO
and press
SEARCHING
will be displayed on the
radio display.
4. Select
VIA RADIO
and press
SEARCHING
will be displayed on the
radio display.
5. Select the desired Bluetooth device
from the list found by your audio unit
and press
OK
.
6. Type any PIN number in the radio with
6 digits.
7.
Check if the number on the radio
display matches the number displayed
on your phone and confirm pairing if
prompted.
8. Once pairing has been successful
SET
PRIMARY
will be displayed on the
radio display.
9. Press the
OK
button twice to confirm
your phone as the primary device for
all future connections.
10.
LOAD PHONEBK
will then be
displayed on the audio unit. Press the
OK
button twice to confirm that the
contents of your phonebook are
downloaded to the system.
11.
The Bluetooth device name is
displayed on the audio unit.
Phonebook Downloading
If your phonebook was not downloaded
during initial Bluetooth pairing follow this
process:
1.
Press the
PHONE
button and then
keep pressing the
MENU
button to
scroll to the
LOAD PHONEBK
display.
2. Press the
OK
button.
Deleting a Paired Device or Phone
To remove a paired device follow this
process:
1.
Press the
PHONE
button and then
keep pressing the
MENU
button to
scroll to the
DEL DEVICE
display.
2. Press the
OK
button. The first paired
device name will be shown. Scroll to
the required device name using the up
and down arrow. Once choose the
device, press
OK
, the message
"DEL
DEVICE"
will appear. Press
OK
,
Scroll
to select
"YES"
and press
OK
to
confirm. Select delete all to erase all
paired devices.
3. Press the
OK
button multiple times to
unpair the device from the audio unit.
Privacy Mode
You can transfer a call from hands free to
private mode during an active call.
Press the
MENU
button until
PRIVACY
appears, then press the
OK
button to
transfer. To return to hands free mode,
press the dial button.
Phone Menu Options
Press the
PHONE
button to select phone
mode. Press the
PHONE
button again to
display information such as phone name,
signal strength and battery level.
332
2018 Transit (TTH) Canada/United States of America, JK3J 19A321 AA enUSA, Edition date: 201705, First Printing
Audio System
