Phone and Voice Pass-Through
Note:
Using the system with the engine off
will drain the battery.
Note:
As no common agreement exists, cell
phone manufacturers are able to implement
a variety of profiles in their Bluetooth
devices. Because of this, an incompatibility
can occur between the phone and hands
free system, which in some cases may
significantly degrade the system
performance. To avoid this situation, only
recommended phones should be used. To
check your cell phone's compatibility, refer
to your device's manual or visit the regional
Ford website.
This section describes the functions and
features of the Bluetooth cell phone hands
free system.
The Bluetooth cell phone part of the
system provides interaction with the audio
system and your cell phone. It allows you
to use the audio system to make and
receive calls without having to hold your
cell phone.
The Voice Pass-Through allows access to
the voice recognition commands on your
cell phone.
Bluetooth Setup
Note:
Up to five Bluetooth devices can be
paired to the system.
Note:
If there is an ongoing call when the
phone in use is selected as the new active
phone, the call is transferred to the vehicle
audio system.
Note:
Even if connected to the system, your
phone can still be used in the usual way.
Note:
A call will be disconnected if the
audio unit is switched off. If the ignition is
switched off the phone call will remain in
progress.
Before you can use your cell phone with
your vehicle it must be paired to the audio
system.
The following procedure is required before
an initial Bluetooth phone connection can
be made.
The information display may show your
cell phone's battery charge level and signal
strength.
Using the device
1.
Press the
PHONE
button and then
keep pressing the
MENU
button to
scroll to the
ADD DEVICE
display.
Press the
OK
button.
2. Select the
VIA DEVICE
and press
OK
.
3. Once
VIA DEVICE
has been selected,
FIND FORD BT
is displayed on the
radio display.
4. Note the six digit number displayed.
5. Search for Bluetooth devices using the
cell phone. For information on phone
settings, refer to your phone user guide.
6. Select
FORD BT
from the list of
Bluetooth devices found by your phone.
7.
Check if the number on the radio
display matches the number displayed
on your phone and confirm pairing if
prompted.
8. Once pairing has been successful
SET
PRIMARY
will be displayed on the
radio display.
9. Press the
OK
button twice to confirm
your phone as the primary device for
all future connections.
10.
LOAD PHONEBK
is then displayed
on the audio unit. Press the
OK
button twice to confirm that the
contents of your phonebook are
downloaded to the system.
11.
The Bluetooth device name is
displayed on the audio unit.
331
2018 Transit (TTH) Canada/United States of America, JK3J 19A321 AA enUSA, Edition date: 201705, First Printing
Audio System
