Ford Taurus 1997 Скачать руководство пользователя страница 43

Страница: 43 / 168

3. Within five more
seconds, press and
release 3/4.

4. Release 7/8.

To reactivate the system, repeat the system
deactivating instructions.

You can also deactivate or reactivate the autolock
feature by this method:

1. Make sure the anti-theft system is not armed or
triggered, ignition is off and all doors are closed.

2. Turn the ignition key from OFF to ON.

3. Press the door power unlock switch three times.

4. Turn the ignition key from ON to OFF.

5. Press the door power unlock switch three times.

6. Turn the ignition key back to ON within 30
seconds of step two.

7. The horn should chirp once. If not, wait 30
seconds and repeat steps one through six.

8. Press the door power unlock switch.

9. Press the door power lock switch.

10. The horn will chirp once if the autolock feature
was deactivated, twice (one short chirp followed by
a long chirp) if the autolock feature was activated.

11. Turn the ignition key to OFF.

12. The horn will chirp once to confirm you
activated or deactivated the autolock feature.

1 2

3 4

5 6

7 8

9 0

Seating and safety restraints

Содержание Taurus 1997









































































































































































Результаты поиска

Содержание Taurus 1997

Отзывы:

Похожие инструкции для Taurus 1997

Бренды по названию

Популярные бренды

Ford Taurus 1997, Руководство пользователя

Результаты поиска

Содержание Taurus 1997

Отзывы:

Похожие инструкции для Taurus 1997

Бренды по названию

Популярные бренды