3.0L Vulcan engine
4. Check the fluid level
on the dipstick. It
should be between the
arrows in the FULL
HOT range. Do not add
fluid if the level is
within this range.
5. If the fluid is low, add fluid in small amounts,
continuously checking the level until it reaches the
FULL HOT range. Be sure to put the dipstick back
in the reservoir.
3.0L Duratec engine and 3.4L SHO engine
4. Check the fluid level
in the reservoir. It
should be between the
MIN and MAX lines. Do
not add fluid if the
level is within this
range.
5. If the fluid is low, add fluid in small amounts,
continuously checking the level until it reaches the
range between the MIN and MAX lines. Be sure to
put the cap back on the reservoir.
AUTOMATIC TRANSAXLE FLUID
Under normal circumstances, the transaxle fluid
does not need to be checked. Refer to the
Service
Guide
for fluid replacement intervals. If the
transaxle is not working properly — for instance, the
transaxle may slip or shift slowly or even some fluid
leakage (red fluid under the vehicle) — the fluid
should be checked.
FULL HOT
MIN
MAX
Maintenance and care
130
Содержание Taurus 1997
Страница 83: ...Improve vehicle ventilation by keeping all air inlet vents clear of snow leaves and other debris Starting 83 ...
Страница 163: ...Vehicle dimensions mm in Sedan Wagon 5 Track Rear 1559 6 61 4 1569 7 61 8 3 5 2 Capacities and specifications 163 ...
Страница 164: ...5 2 3 Capacities and specifications 164 ...
Страница 165: ...4 1 Capacities and specifications 165 ...
