•
Locking bezel is damaged or broken or
will not lock into place.
•
Not seated correctly within the support
rail.
Load Rating of Type 3 Tie Down Points
(Rope Hook): 250 kg.
Fitting the Type 3 Tie Down Points
WARNING
Bezel must be fully engage into the
rail to secure the tie down point for
safe use. The word ‘Not Locked’ will
be visible in the incorrectly installed tie
downs.
1
2
E134099
1.
Engage the base of the tie down point
into the rail channel while holding the
cleat vertically.
2. Slide along the rail until the pin on the
base of the tie down engages in a
desired hole on the rail.
3. Push the tie down in and rotate a
quarter turn clockwise until the tie
down cleat is horizontal and the locking
bezel “snaps” into place.
Removing the Type 3 Tie Down Points
1.
Grasp the locking bezel between the
thumb and fingers using the finger
recess.
2. Pull the bezel away from the rail until
the base of the tie down point is fully
disengaged from the rail channel.
3. Turn the tie down point a quarter turn
anticlockwise until it snaps out of the
rail.
Load Rest
WARNINGS
A loaded load rest alters the vehicle's
center of gravity and aerodynamics.
Take care when cornering, driving in
crosswinds and at high speeds.
Do not exceed the permissible gross
weight. See
121
Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing
Load Carrying
Содержание Ranger 2012
