50
th
Anniversary
Ford Mustang Cobra Jet
Official Owners Manual
Techline 1-800-367-3788
Page 14
Launch Control RPM Setting
The launch control is set using the L/C Set and the L/C
+/-
switches on the center
console. This may be done whether the engine is running or not. To adjust the launch
control RPM set point in the vehicle, a simple 3 step process is required:
1.
Depress the brake pedal, hold the L/C
+/-
switch up for approximately 3 seconds.
The tachometer will sweep to 8000 RPM and back to the current launch control
set point.
2.
Release the brake pedal and L/C
+/-
switch.
3.
Use the L/C
+/-
switch to increase or decrease until the desired setting is reached.
4.
Hold the L/C Set switch up for approximately 3 seconds to save the new setting to
the PCM.
Note that the launch control set point may also be changed via the ProCal3 software.
4.2 Operation
The launch control system activates when the brake pedal is depressed. No buttons
need to be pressed. At the starting line, the driver will apply firm pressure on the brake
with the left foot and apply full throttle with the right. The launch control will hold the
engine RPM at the preset speed. Once the driver releases the brakes to launch, the
launch control deactivates and allows the engine to rev freely.
