50
th
Anniversary
Ford Mustang Cobra Jet
Official Owners Manual
Techline 1-800-367-3788
Page 47
Before setting the wheelie bar height, make sure your vehicle’s suspension is properly
set up. Refer to Section 9.4 Chassis Setup for suspension setup instructions. Set your
front and rear tire pressure and make sure the vehicle is settled.
Once the vehicle is properly setup, set the wheelie bar height to 5-5 ¼ inches to the
center of the wheelie bar wheel by loosening the jam nuts and turning the lower bar to
either raise or lower the bar. Once the height is achieved, snug the jam nuts on both
ends of the lower bar.
The lower and upper bars have two attachment locations. The upper hole location is
used for racing the lower location raises the bar for loading and trailering the vehicle. In
this position, however, there is still the possibility of damage. Please evaluate your
particular situation as removal of the wheelie bar assembly may be required. The
wheelie bar wheel requires no lubrication.
