Note:
Typical road dust, dirt and water
spots will not affect the performance of the
automatic high beam system. However, in
cold or inclement weather conditions, you
will notice a decrease in the availability of
the high beam system, especially at start
up. If you want to change the beam state
independently of the system, you may
switch the high beams on or off using the
multifunction switch. Automatic control will
resume when conditions are correct.
Note:
Modification of the vehicle ride height
such as using much larger tires, may
degrade feature performance.
A camera sensor, centrally mounted
behind the windshield of your vehicle,
continuously monitors conditions to decide
when to switch the high beams off and on.
Once the system is active, the high beams
will switch on if:
•
the ambient light level is low enough
•
there is no traffic in front of the vehicle
•
the vehicle speed is greater than
approximately 32 mph (52 km/h).
The high beams will switch off if:
•
the system detects the headlamps of
an approaching vehicle or the tail
lamps of a preceding vehicle.
•
vehicle speed falls below
approximately 27 mph (44 km/h)
•
the ambient light level is high enough
that high beams are not required
•
the system detects severe rain, snow
or fog
•
the camera is blocked.
Activating the System
Switch the system on using the information
display. See
94). Switch the autolamps on. See
E142451
Manually Overriding the System
E169254
When the automatic control has activated
the high beams, pushing or pulling the stalk
will provide a temporary override to low
beam.
Use the information display menu to
permanently deactivate the system, or turn
the lighting control switch from autolamps
to headlamps.
77
Fusion Energi / Fusion Hybrid (CC7) Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV), Canada/United States of America, enUSA, Edition date: 201602, Second Printing
Lighting
Содержание FUSION ENERGI 2017
Страница 3: ......
