Ford Fusion 2011 страница 83 Скачать руководство пользователя

Страница: 83 / 374

Using speed controls

The speed controls are located on the steering wheel. The following
buttons work with speed control:

– SET +:

Press to set a speed or to

increase or decrease the set speed.

CNCL (Cancel)/RSM (Resume):

Press to return cancel or resume a
set speed.

ON/OFF:

Press to turn speed

control on or off.

The speed control system uses
two

indicator lights in the

instrument cluster:

•

an amber indicator light which illuminates when the system is on, and

•

a green indicator light which illuminates when the system is engaged.

Setting speed control

To set speed control:

1. Press and release ON.

2. Accelerate to the desired speed.

3. Press and release SET +.

4. Take your foot off the accelerator pedal.

5. The green indicator

light on the instrument cluster will turn on.

Note:

•

Vehicle speed may vary momentarily when driving up and down a
steep hill.

•

If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.

•

If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.

Driver Controls

2011 Fusion

(fsn)

Owners Guide, 3rd Printing
USA

(fus)

Содержание Fusion 2011























































































































































































































































































































































































Результаты поиска

Содержание Fusion 2011

Отзывы:

Похожие инструкции для Fusion 2011

Бренды по названию

Популярные бренды

Ford Fusion 2011, Руководство пользователя

Результаты поиска

Содержание Fusion 2011

Отзывы:

Похожие инструкции для Fusion 2011

Бренды по названию

Популярные бренды