Ford Fusion 2011 Скачать руководство пользователя

Страница: 30 / 374

PRESS UP OR DOWN TO CHANGE RDS CATEGORY will appear in the
display. Press

to scroll through all possible categories. When the

desired category appears in the display, press

SEEK/TRACK

find the next station playing that selection or press SCAN for a brief
sampling of all stations playing that category of music.

CD/MP3 Player

CD:

Press to enter CD/MP3 mode. If a disc is already loaded into the

system, CD/MP3 play will begin where it ended last. If no CD is loaded,
NO DISC will appear in the display.

LOAD:

To load a CD, simply insert the disc, label side up, into the CD

slot.

EJECT:

Press EJECT to eject the CD.

Play/Pause:

Press to

play/pause a track when playing a
CD.

SEEK/TRACK:

Press

SEEK/TRACK

to access the

previous/next track.

CAT (Category) / FOLD (Folder):

In MP3 mode only–

Press CAT/FOLD and then press

SEEK/TRACK

to access the previous/next folder.

SCAN:

Press for a brief sampling of all tracks on the current disc or

MP3

folder.

DIRECT:

In CD mode–

Press DIRECT. The display will read DIRECT TRACK

MODE SELECT TRACK. Enter the desired track number using the
memory preset buttons (0–9). The system will then begin playing that
track.

In MP3 folder mode–

Press DIRECT and the memory preset buttons

(0–9) of the desired folder. The system will advance to that specific
folder.

TEXT:

In MP3 mode only–

Press TEXT repeatedly to view Album (AL), Folder

(FL), Song (SO) and Artist (AR) in the display, if available.

Entertainment Systems

2011 Fusion

(fsn)

Owners Guide, 3rd Printing
USA

(fus)

Содержание Fusion 2011























































































































































































































































































































































































Результаты поиска

Содержание Fusion 2011

Отзывы:

Похожие инструкции для Fusion 2011

Бренды по названию

Популярные бренды

Ford Fusion 2011, Руководство пользователя

Результаты поиска

Содержание Fusion 2011

Отзывы:

Похожие инструкции для Fusion 2011

Бренды по названию

Популярные бренды