![Ford FLEX 2014 Скачать руководство пользователя страница 314](http://html1.mh-extra.com/html/ford/flex-2014/flex-2014_owners-manual_2318348314.webp)
Replacing front parking lamp/turn signal bulbs
1. Make sure headlamp switch is in the off position, then open the hood.
2. Reach behind the headlamp assembly to access the bulb sockets .
3. Remove the bulb socket by
turning it counterclockwise and
pulling it straight out.
4. To remove the bulb, pull it
straight out of the bulb socket.
Install the new bulb(s) in reverse order.
Replacing fog lamp bulbs
1. Make sure the fog lamp switch is in the off position.
2. From underneath the vehicle,
partially remove the tire splash
shield by removing four drive
screws from the lower flap.
The splash shield flap can now be
repositioned to allow access to the
front fog lamp bulb and electrical
wire harness.
3. Carefully disconnect the wire
harness connector from the bulb by
releasing the two snap clips.
4. Rotate the bulb counterclockwise
to remove from the fog lamp.
Install the new bulb in reverse order.
Maintenance
313
2014 Flex
(471)
Owners Guide gf, 2nd Printing, November 2013
USA
(fus)
Содержание FLEX 2014
Страница 152: ...Power Lumbar If Equipped Seats 151 2014 Flex 471 Owners Guide gf 2nd Printing November 2013 USA fus...
Страница 248: ...Example only Load Carrying 247 2014 Flex 471 Owners Guide gf 2nd Printing November 2013 USA fus...
Страница 535: ...534 Scheduled Maintenance 2014 Flex 471 Owners Guide gf 2nd Printing November 2013 USA fus...