![Ford FLEX 2014 Скачать руководство пользователя страница 312](http://html1.mh-extra.com/html/ford/flex-2014/flex-2014_owners-manual_2318348312.webp)
On the wall or screen you will
observe a flat zone of high intensity
light located at the top of the right
hand portion of the beam pattern.
If the top edge of the high intensity
light zone is not at the horizontal
reference line, the headlamp will
need to be adjusted.
4. Locate the vertical adjuster on
each headlamp. Using a Phillips #2
screwdriver, turn the adjuster either
clockwise or counterclockwise in
order to adjust the vertical aim of
the headlamp. The horizontal edge
of the brighter light should touch
the horizontal reference line.
5. Close the hood and turn off the lamps.
HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS
NON-ADJUSTABLE.
CHANGING A BULB
Lamp Assembly Condensation
Exterior lamps are vented to accommodate normal changes in pressure.
Condensation can be a natural by-product of this design. When moist air
enters the lamp assembly through the vents, there is a possibility that
condensation can occur when the temperature is cold. When normal
condensation occurs, a thin film of mist can form on the interior of the
lens. The thin mist eventually clears and exits through the vents during
normal operation. Clearing time may take as long as 48 hours under dry
weather conditions.
These are examples of acceptable condensation:
•
Presence of thin mist (no streaks, drip marks or droplets).
•
Fine mist covers less than 50% of the lens.
Maintenance
311
2014 Flex
(471)
Owners Guide gf, 2nd Printing, November 2013
USA
(fus)
Содержание FLEX 2014
Страница 152: ...Power Lumbar If Equipped Seats 151 2014 Flex 471 Owners Guide gf 2nd Printing November 2013 USA fus...
Страница 248: ...Example only Load Carrying 247 2014 Flex 471 Owners Guide gf 2nd Printing November 2013 USA fus...
Страница 535: ...534 Scheduled Maintenance 2014 Flex 471 Owners Guide gf 2nd Printing November 2013 USA fus...