![Ford FLEX 2014 Скачать руководство пользователя страница 242](http://html1.mh-extra.com/html/ford/flex-2014/flex-2014_owners-manual_2318348242.webp)
Blocked Sensors
If a message regarding a blocked
sensor appears in the information
display, the radar signals from the
sensor have been obstructed. The
sensors are located behind a fascia
cover near the driver side of the
lower grille. When the sensors are
obstructed, a vehicle ahead cannot
be detected and the collision warning system does not function. The
following table lists possible causes and actions for this message being
displayed.
Cause
Action
The surface of the radar in the
grille is dirty or obstructed in
some way
Clean the grille surface in front of
the radar or remove the object
causing the obstruction
The surface of the radar in the
grille is clean but the message
remains in the display
Wait a short time. It may take
several minutes for the radar to
detect that it is no longer
obstructed
Heavy rain, spray, snow, or fog is
interfering with the radar signals
The collision warning system is
temporarily disabled. Collision
warning should automatically
reactivate a short time after the
weather conditions improve.
Swirling water, or snow or ice on
the surface of the road may
interfere with the radar signals
The collision warning system is
temporarily disabled. Collision
warning should automatically
reactivate a short time after the
weather conditions improve.
Driving Aids
241
2014 Flex
(471)
Owners Guide gf, 2nd Printing, November 2013
USA
(fus)
Содержание FLEX 2014
Страница 152: ...Power Lumbar If Equipped Seats 151 2014 Flex 471 Owners Guide gf 2nd Printing November 2013 USA fus...
Страница 248: ...Example only Load Carrying 247 2014 Flex 471 Owners Guide gf 2nd Printing November 2013 USA fus...
Страница 535: ...534 Scheduled Maintenance 2014 Flex 471 Owners Guide gf 2nd Printing November 2013 USA fus...