Revised September 13, 2013
Calibrate the Speedometer & Tachometer
Speedometer / Tachometer Setup Option Menu
Tach Pointer
Location
Setup Option
Description
1000 RPM
Tachometer Cylinder
Setup
Sets number of cylinders.
2000 RPM
Tachometer Signal
Type
Selects between 5V and 12V tachometer
signal.
3000 RPM
Speed Auto Calibrate
Calibrates speed using an exact marked mile.
4000 RPM
Real-Time Speed
Adjust
Manually increase or decrease speed.
8000 RPM
Exit
Exit setup
Entering Setup Mode:
1)
Start with the power off. While pressing the
pushbutton, start the vehicle’s engine.
Release the pushbutton when the
engine is running and the
speedometer pointer is at 70MPH.
2)
The tachometer will point to 1000
RPM and the speedometer will
point at 70MPH once you have
successfully entered the setup mode.
Fig. 1
3)
Tapping the pushbutton will cycle through
the setup options.
4)
Pressing and holding (approx. 4 seconds) the pushbutton will select
the current setup option that the
tachometer is indicating.
5)
When setup is complete, select the
exit option (8000 RPM) then press
and hold the pushbutton.
Fig. 2
FIG. 1
FIG. 2
