You can use the keypad to:
•
lock or unlock the doors
•
open the trunk
•
recall memory features
•
enable or disable the autolock
and autounlock
•
arm and disarm the anti-theft
alarm (if equipped)
You can operate the keypad with the factory-set 5-digit entry code.
The code is located on the owner’s wallet card in the glove box and is
available from an authorized dealer. You can also create up to three of
your own 5-digit personal entry codes.
Programming a Personal Entry Code
To create your own personal entry code:
1. Enter the factory-set code.
2. Press the
1
•
2
on the keypad within five seconds.
3. Enter your personal 5-digit code. You must enter each number within
five seconds of each other.
4. For memory recall feature, enter the sixth digit
1
•
2
to store driver 1
settings or
3
•
4
to store driver 2 settings.
Note:
Pressing
5
•
6
,
7
•
8
, or
9
•
0
keypad numbers as a sixth digit will
not recall a driver memory setting.
Note:
The factory-set code cannot be associated with a memory setting.
5. The doors will lock and then unlock to confirm that programming is
complete.
Locks
73
2015 Taurus
Owners Guide gf, 2nd Printing, November 2014
USA (fus)
