3. While holding the shoulder and
lap belt portions together, route the
tongue through the child seat
according to the child seat
manufacturer’s instructions. Be sure
the belt webbing is not twisted.
4. Insert the belt tongue into the
proper buckle (the buckle closest to
the direction the tongue is coming
from) for that seating position until
you hear a snap and feel the latch
engage. Make sure the tongue is
latched securely by pulling on it.
5. To put the retractor in the
automatic locking mode, grasp the
shoulder portion of the belt and pull
downward until all of the belt is
pulled out.
Note:
The automatic locking mode is available on the front passenger
and rear seats. This vehicle does not require the use of a locking clip.
6. Allow the belt to retract to remove slack. The belt will click as it
retracts to indicate it is in the automatic locking mode.
7. Try to pull the belt out of the retractor to make sure the retractor is
in the automatic locking mode. You should not be able to pull more belt
out. If the retractor is not locked, unbuckle the belt and repeat Steps 5
and 6.
Child Safety
25
2013 Fiesta
(fie)
Owners Guide gf, 2nd Printing
USA
(fus)
Содержание 2013 Fiesta
Страница 124: ...Moving the Seats Backward and Forward Seats 123 2013 Fiesta fie Owners Guide gf 2nd Printing USA fus ...
Страница 125: ...Adjusting the Height of the Driver s Seat 124 Seats 2013 Fiesta fie Owners Guide gf 2nd Printing USA fus ...
Страница 274: ...Scheduled Maintenance 273 2013 Fiesta fie Owners Guide gf 2nd Printing USA fus ...