4. Locate the vertical adjuster on
each headlamp. Using a Phillips #2
or 13 millimeter wrench/socket
screwdriver, turn the adjuster either
clockwise or counterclockwise in
order to adjust the vertical aim of
the headlamp. The horizontal edge
of the brighter light should touch
the horizontal reference line.
5. Close the hood and turn off the lamps.
HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS
NOT ADJUSTABLE.
REMOVING A HEADLAMP
Note:
Remove the front lamp assembly in order to replace the bulbs.
1. Make sure the headlamp control
is in the off position, then open the
hood.
2. Remove the screws and pushpin
holding the lamp assembly (driver
side shown).
3. Disconnect the electrical
connector.
4. Remove the lamp assembly.
Note:
When lamp is removed, you
will hear a clicking sound.
5. Reverse the procedure to install
the lamp assembly.
Note:
When installing the front lamp assembly, the front flange must be
placed under the fascia. Ensure that the bottom tab gets placed properly
into the white clip.
2
3
Maintenance
213
2013 Fiesta
(fie)
Owners Guide gf, 2nd Printing
USA
(fus)
Содержание 2013 Fiesta
Страница 124: ...Moving the Seats Backward and Forward Seats 123 2013 Fiesta fie Owners Guide gf 2nd Printing USA fus ...
Страница 125: ...Adjusting the Height of the Driver s Seat 124 Seats 2013 Fiesta fie Owners Guide gf 2nd Printing USA fus ...
Страница 274: ...Scheduled Maintenance 273 2013 Fiesta fie Owners Guide gf 2nd Printing USA fus ...