Note:
We recommend that upon the sale or lease termination of your
vehicle, you erase the programmed function buttons for security reasons.
See
Erasing the Function Button Codes
later in this section.
Note:
You can program a maximum of three devices. To change or
replace any of the three devices after it has been initially programmed,
you must first erase the current settings. See
Erasing the Function
Button Codes
later in this section.
Note:
Programming the system to a community gate will require a
unique set of instructions depending on the gate system model. Contact
the help line at 1-866-572-2728 for further information.
Note:
If you accidently enter the program mode by pressing and
releasing the outer two buttons or all three buttons simultaneously, do
not press any button until the module times out after a few seconds and
resets to normal mode. When the module has timed out, all three LED
lamps will flash rapidly for a few seconds then turn off. Any settings
should remain as previously set.
The universal garage door opener
replaces the common hand-held
garage door opener with a
three-button transmitter that is
integrated into the driver’s sun
visor.
The system includes two primary
features, a garage door opener and a platform for remote activation of
devices with the home. As well as being programmed for garage doors,
the system transmitter can be programmed to operate security devices
and home lighting systems.
Additional system information can be found on-line at
www.learcar2U.com or by calling the toll-free help line 1-866-572-2728.
Rolling Code Programming
Note:
If you do not follow the time-sensitive instructions, the device will
time out and you will have to repeat the complete procedure.
Note:
It may be helpful to have another person assist you in
programming the transmitter.
Universal Garage Door Opener (If Equipped)
185
2013 Expedition
(exd)
Owners Guide gf, 3rd Printing, April 2013
USA
(fus)