Ford 2012 Mustang 197 Скачать руководство пользователя страница 81

Страница: 81 / 343

STEERING WHEEL CONTROLS (IF EQUIPPED)

With navigation system
(if equipped)

•

Press

to use the voice

command features.

For further information on using
voice commands with the
navigation system, refer to the

Navigation System

supplement.

•

Press

to select the entertainment playing media (radio, CD, line in,

etc.).

•

Press

– VOL +

to adjust the volume in any mode.

•

Press

to activate phone mode.

Refer to the

Navigation System

supplement for more information on

using phone features.

•

Press

to change radio stations/CD tracks.

Refer to the

Navigation System

supplement for more information on

using this feature.

With SYNC

威

system

(if equipped)

•

Press

to use the voice

command features.

For further information on using
voice commands with the SYNC

威

system, refer to the

SYNC

威

supplement.

•

Press

to select the entertainment playing media (radio, CD, line in,

etc.).

•

Press

– VOL +

to adjust the volume in any mode.

•

Press

to activate phone mode.

Refer to the

SYNC

威

supplement for more information on using phone

features.

•

Press

to confirm selections various audio and SYNC

威

selections.

For further information on the SYNC

威

system, refer to the

SYNC

威

supplement.

•

Press

to change radio stations/CD tracks.

Driver Controls

2012 05+ Mustang

(197)

Owners Guide, 2nd Printing
USA

(fus)

Содержание 2012 Mustang 197
























































































































































































































































































































































Результаты поиска

Содержание 2012 Mustang 197

Отзывы:

Бренды по названию

Популярные бренды

Ford 2012 Mustang 197, Руководство пользователя

Результаты поиска

Содержание 2012 Mustang 197

Отзывы:

Бренды по названию

Популярные бренды