Ford 2012 Mustang 197 Скачать руководство пользователя страница 79

Страница: 79 / 343

SPEED CONTROL

With speed control set, you can maintain a set speed without keeping
your foot on the accelerator pedal.

WARNING:

Do not use the speed control in heavy traffic or on

roads that are winding, slippery or unpaved.

Using speed controls

The speed controls are located on the steering wheel. The following
buttons work with speed control:

Base controls

Optional controls

ON/OFF:

Press to turn the system on or off.

SET (+):

Press to set a speed or to increase a set speed.

SET (–):

Press to decrease a set speed.

RES / RESUME:

Press to resume a set speed.

Setting speed control

The set speed control:

1. Press and release ON.

2. Accelerate to the desired speed.

3. Press and release SET (+).

4. Take your foot off the accelerator pedal.

5. The indicator

light on the instrument cluster will turn on.

Note:

•

Vehicle speed may vary momentarily when driving up and down a
steep hill.

RES

SET

OFF

RESUME

OFF ON

SET

Driver Controls

2012 05+ Mustang

(197)

Owners Guide, 2nd Printing
USA

(fus)

Содержание 2012 Mustang 197
























































































































































































































































































































































Результаты поиска

Содержание 2012 Mustang 197

Отзывы:

Бренды по названию

Популярные бренды

Ford 2012 Mustang 197, Руководство пользователя

Результаты поиска

Содержание 2012 Mustang 197

Отзывы:

Бренды по названию

Популярные бренды