Ford 2012 Mustang 197 Скачать руководство пользователя страница 36

Страница: 36 / 343

Sound adjustments

Press SOUND repeatedly to cycle
through the following features:

•

Shaker mode (if equipped):

Press

SEEK

to turn Shaker

mode on/off.

•

BASS:

Press

SEEK

to adjust the level of bass or turn the

TUNE knob.

•

TREBLE:

Press

SEEK

to adjust the level of treble, or turn

the TUNE knob.

•

BALANCE:

Press

SEEK

to adjust the audio between the left

(L) and right (R) speakers or turn the TUNE knob.

•

FADE:

Press

SEEK

to adjust the audio between the back (B)

and front (F) speakers or turn the TUNE knob.

•

SPEED COMPENSATED VOLUME:

With this feature on, radio

volume automatically gets louder with increasing vehicle speed to
compensate for road and wind noise. The default setting is

off.

Use

SEEK

to adjust between SPEED OFF and levels

1–7.

Recommended level is

1–3;

SPEED OFF turns the feature off and

level 7 is the maximum setting.

•

ALL SEATS (Occupancy Mode, if equipped):

Press

SEEK

to select and optimize sound for ALL SEATS, DRIVERS SEAT or
REAR SEATS.

•

DSP MODE (if equipped):

Press

SEEK

to choose between

STEREO SURROUND mode and STEREO mode.

Entertainment Systems

2012 05+ Mustang

(197)

Owners Guide, 2nd Printing
USA

(fus)

Содержание 2012 Mustang 197
























































































































































































































































































































































Результаты поиска

Содержание 2012 Mustang 197

Отзывы:

Бренды по названию

Популярные бренды

Ford 2012 Mustang 197, Руководство пользователя

Результаты поиска

Содержание 2012 Mustang 197

Отзывы:

Бренды по названию

Популярные бренды