Ford 2012 F-250 Super Duty страница 114 Скачать руководство пользователя

Страница: 114 / 454

CNCL (Cancel)/RSM (Resume):

Press to cancel or resume a set
speed.

ON/OFF:

Press to turn the system

on or off.

– SET +:

Press to set a speed or to

decrease or increase a set speed.

The speed control system uses two

indicator lights in the instrument

cluster:

•

an amber indicator light which illuminates when the system is on, and

•

a green indicator light which illuminates when the system is engaged.

Setting speed control

To set speed control:

1. Press and release ON.

2. Accelerate to the desired speed.

3. Press and release SET +.

4. Take your foot off the accelerator pedal.

5. The green indicator light

on the instrument cluster will turn on.

Note:

•

Vehicle speed may vary momentarily when driving up and down a
steep hill.

•

If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.

•

If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.

Disengaging a set speed

To disengage speed control, tap the brake pedal or press and release
CNCL.

Disengaging the speed control will not erase the previous set speed.

Resuming a set speed

Press and release RSM. This will automatically return the vehicle to the
previously set speed.

ON/

OFF

CNCL

RSM

- SET +

Driver Controls

114

2012 F-250/350/450/550

(f23)

Owners Guide, 1st Printing
USA

(fus)

Содержание 2012 F-250 Super Duty







































































































































































































































































































































































































































































Результаты поиска

Содержание 2012 F-250 Super Duty

Отзывы:

Похожие инструкции для 2012 F-250 Super Duty

Бренды по названию

Популярные бренды

Ford 2012 F-250 Super Duty, Руководство пользователя

Результаты поиска

Содержание 2012 F-250 Super Duty

Отзывы:

Похожие инструкции для 2012 F-250 Super Duty

Бренды по названию

Популярные бренды