Ford 2012 F-250 Super Duty страница 161 Скачать руководство пользователя

Страница: 161 / 454

WARNING:

The non-adjustable head restraint is a safety device.

It should be installed whenever the seat is occupied.

WARNING:

To minimize the risk of neck injury in the event of a

crash, head restraints must be installed properly.

Front seat

•

Lift the track release bar to move
the seat forward or rearward.
Make sure that the seat is
relatched into place.

•

Pull the release lever handle
located on the side of the seat up
to move the seatback forward or
backward.

Seating and Safety Restraints

161

2012 F-250/350/450/550

(f23)

Owners Guide, 1st Printing
USA

(fus)

Содержание 2012 F-250 Super Duty







































































































































































































































































































































































































































































Результаты поиска

Содержание 2012 F-250 Super Duty

Отзывы:

Похожие инструкции для 2012 F-250 Super Duty

Бренды по названию

Популярные бренды

Ford 2012 F-250 Super Duty, Руководство пользователя

Результаты поиска

Содержание 2012 F-250 Super Duty

Отзывы:

Похожие инструкции для 2012 F-250 Super Duty

Бренды по названию

Популярные бренды