Ford 2011 F-150 Lariat Limited Скачать руководство пользователя страница 247

Страница: 247 / 464

Additional information contained on the tire sidewall for “LT” type
tires

“LT” type tires have some additional
information beyond those of “P”
type tires; these differences are
described below.

Note:

Tire Quality Grades do not

apply to this type of tire.

LT:

Indicates a tire, designated by

the Tire and Rim Association
(T&RA), that is intended for service
on light trucks.

Load Range/Load Inflation

Limits:

Indicates the tire’s

load-carrying capabilities and its
inflation limits.

Maximum Load Dual lb (kg) at psi (kPa) cold:

Indicates the

maximum load and tire pressure when the tire is used as a dual; defined
as four tires on the rear axle (a total of six or more tires on the vehicle).

Maximum Load Single lb (kg) at psi (kPa) cold:

Indicates the

maximum load and tire pressure when the tire is used as a single;
defined as two tires (total) on the rear axle.

Tires, Wheels and Loading

247

2011 F-150

(f12)

Owners Guide, 3rd Printing
USA

(fus)

Содержание 2011 F-150 Lariat Limited

















































































































































































































































































































































































































































































Результаты поиска

Содержание 2011 F-150 Lariat Limited

Отзывы:

Бренды по названию

Популярные бренды

Ford 2011 F-150 Lariat Limited, Руководство пользователя

Результаты поиска

Содержание 2011 F-150 Lariat Limited

Отзывы:

Бренды по названию

Популярные бренды