Ford 2011 F-150 Lariat Limited Скачать руководство пользователя

Страница: 31 / 464

speed is 80 mph (130 km/h). Refer to

MyKey

威

in the

Locks and

Security

chapter for more information.

SPEED LIMITED TO 80 MPH

— Displayed when starting the vehicle

and MyKey

威

is in use and the MyKey speed limit is on. Refer to

MyKey

威

in the

Locks and Security

chapter for more information.

CHECK SPEED DRIVE SAFELY

— Displayed when a MyKey

威

is in

use and the optional setting is on and the vehicle exceeds a preselected
speed. Refer to

MyKey

威

in the

Locks and Security

chapter for more

information.

VEHICLE NEAR TOP SPEED

— Displayed when a MyKey

威

is in use

and the MyKey speed limit is on and the vehicle speed is approaching
80 mph (130 km/h). Refer to

MyKey

威

in the

Locks and Security

chapter for more information.

TOP SPEED MYKEY SETTING

— Displayed when a MyKey

威

is in use

and the MyKey speed limit is on and the vehicle speed is 80 mph
(130 km/h). Refer to

MyKey

威

in the

Locks and Security

chapter for

more information.

BUCKLE UP TO UNMUTE AUDIO

— Displayed when a MyKey

威

is in

use and Belt-Minder

威

is activated. Refer to

MyKey

威

in the

Locks and

Security

chapter for more information.

ADVTRAC ON MYKEY SETTING

— Displayed when a MyKey

威

is in

use when trying to disable the AdvanceTrac

威

system and the optional

setting is on. Refer to

MyKey

威

in the

Locks and Security

chapter for

more information.

TO STOP ALARM START VEHICLE

— Displayed when the perimeter

alarm system is armed and the vehicle is entered using the key on the
driver’s side door. In order to prevent the perimeter alarm system from
triggering, the ignition must be turned to start or on before the
12 second chime expires. See

Perimeter alarm system

in the

Locks and

security

chapter.

SECURITY SYSTEM FAULT

— Displayed when the security system

has detected a fault. See your authorized dealer for service.

INTKEY COULD NOT PROGRAM

— Displayed when an attempt is

made to program a fifth integrated key to the remote keyless entry
system. For more information on integrated key, refer to the

Locks and

Security

chapter.

KEY COULD NOT PROGRAM

— Displayed when an attempt is made

to program a spare key using two existing MyKeys. Refer to

MyKey

威

the

Locks and Security

chapter for more information.

Instrument Cluster

2011 F-150

(f12)

Owners Guide, 3rd Printing
USA

(fus)

Содержание 2011 F-150 Lariat Limited

















































































































































































































































































































































































































































































Результаты поиска

Содержание 2011 F-150 Lariat Limited

Отзывы:

Похожие инструкции для 2011 F-150 Lariat Limited

Бренды по названию

Популярные бренды

Ford 2011 F-150 Lariat Limited, Руководство пользователя

Результаты поиска

Содержание 2011 F-150 Lariat Limited

Отзывы:

Похожие инструкции для 2011 F-150 Lariat Limited

Бренды по названию

Популярные бренды