Ford 2011 F-150 Lariat Limited страница 196 Скачать руководство пользователя

Страница: 196 / 464

WARNING:

The National Highway Traffic Safety Administration

(NHTSA) recommends a minimum distance of at least 10 inches

(25 cm) between an occupant’s chest and the driver airbag module.

WARNING:

Never place your arm over the airbag module as a

deploying airbag can result in serious arm fractures or other

injuries.

To properly position yourself away from the airbag:

•

Move your seat to the rear as far as you can while still reaching the
pedals comfortably.

•

Recline the seat slightly one or two degrees from the upright position.

WARNING:

Do not put anything on or over the airbag module.

Placing objects on or over the airbag inflation area may cause

those objects to be propelled by the airbag into your face and torso
causing serious injury.

WARNING:

Do not attempt to service, repair, or modify the

airbag supplemental restraint systems or its fuses. Contact your

authorized dealer as soon as possible.

WARNING:

The front passenger airbag is not designed to offer

protection to an occupant in the center front seating position.

WARNING:

Modifying or adding equipment to the front end of

the vehicle (including frame, bumper, front end body structure

and tow hooks) may affect the performance of the airbag system,
increasing the risk of injury. Do not modify the front end of the
vehicle.

WARNING:

Additional equipment may affect the performance of

the airbag sensors increasing the risk of injury.

Seating and Safety Restraints

196

2011 F-150

(f12)

Owners Guide, 3rd Printing
USA

(fus)

Содержание 2011 F-150 Lariat Limited

















































































































































































































































































































































































































































































Результаты поиска

Содержание 2011 F-150 Lariat Limited

Отзывы:

Похожие инструкции для 2011 F-150 Lariat Limited

Бренды по названию

Популярные бренды

Ford 2011 F-150 Lariat Limited, Руководство пользователя

Результаты поиска

Содержание 2011 F-150 Lariat Limited

Отзывы:

Похожие инструкции для 2011 F-150 Lariat Limited

Бренды по названию

Популярные бренды