Ford 2006 Escape J87R, Руководство по ремонту кузовов

Страница: 53 / 90

BODY STRUCTURE [PANEL REPLACEMENT]
09-80B–27
80B
REAR PILLAR (OUTER) AND REAR PILLAR REINFORCEMENT INSTALLATION[PANEL REPLACEMENT]
id098008615400
1. When joining the new and old parts, temporarily install and fit the new part in position, measure each
dimension according to the body dimension, then adjust the position to align it to the standard dimensions.
2. Drill holes for plug welds before installing new parts.
3. Install in the following order: corner plate, rear pillar reinforcement, and rear pillar (outer).
4. Weld locations indicated by (A) during installation of the rear pillar (outer).
5. Weld locations indicated by (B) during installation of the rear fender panel.
6. After temporarily installing new parts, make sure the related parts fit properly.
End Of Sie
BM: TRUNK FLOOR PAN
1
5
4
3
9
5
5
3
2
1 3
(A) 2
(B) 2
(B) 2
(A) 4
(A) 3
(A) 5
10
1
1
+
45mm
{1.77in}
CORNER PLATE
INNER SIDE 2
INSULATOR
50mm
{1.96in}
CUT-AND-JOIN LOCATION
REAR PILLAR (OUTER)
CUT-AND-JOIN LOCATION FOR
THE REAR PILLAR REINFORCEMENT
FOR THE
BUE0980B027